液压泵的状态监测与故障诊断

本文对ＹＢ—Ｄ—２５型液压泵的振动进行了分析,找到了故障特征,建立了故障诊断模型。通过建立故障判断准则,实现了液压泵的状态监测与故障诊断。     

轴流泵出口环量变化规律与几何参数一体化最优设计方法

最近十几年来,叶轮机械最优设计取得了很大进展。作为其最优设计系统的一个典型环节,叶片泵的设计优化得到了重视。近年来,我国开始探索采用变轴面速度、变环量流型进行轴流泵水力设计,并讨论环量分布规律的优化问题。文献针对不同的目标函数,分别求解叶轮直径及出口环量分布规律最佳值,这等于把一个完整的问题分解了,并不一定能保证     

旋转泵式鱼雷发射系统建模与仿真

介绍了由高压气瓶、发射阀、喷射式空气轮机、混流泵组成的一种新型旋转泵式鱼雷发射系统,建立了该系统的仿真模型,对鱼雷发射过程进行了仿真并对结果作了分析.     

鱼雷最大航向估计在反鱼雷中的应用

在悬浮式深弹反鱼雷时,若只能根据声纳兵的经验估计鱼雷距离,如何正确估计鱼雷航向角范围就成为正确布放悬浮式深弹的关键.从直航雷的相遇三角形和尾流鱼雷命中目标条件出发,推导出鱼雷相对舰艇的正常提前角,从而确定鱼雷在被发现点的最大航向角范围,为正确投放悬浮式深弹提供了理论依据.     

Influence of a liquid-filled compartment structure on the incoming shaped charge jet stability

Liquid-filled compartment structure consists of a bulk steel plate with matrix blind holes which are filled with liquid and a steel front plate to seal up the liquid with rings and bolts.The liquid-filled compart-ment structure can resist the shaped charge warhead effectively.This paper presents experimental and theoretical investigations of the penetration ability of the residual shaped charge jet emerging from the liquid-filled compartment structure after the penetration process at different impact angles.On the basis of shock wave propagation theory,the influence of the liquid-filled compartment structure on jet sta-bility is analysed.The interferences of the liquid backflow caused by a reflected shock wave and a back plate on jet stability under different impact angles are also examined.In addition,the range of the disturbed velocity segments of the jet at different impact angles and the penetration ability of the re-sidual jet are obtained.A theoretical model is validated against the experimental penetration depths.     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

Numerical investigation on free air blast loads generated from center-initiated cylindrical charges with varied aspect ratio in arbitrary orientation

In current guidelines, the free air blast loads (overpressure and impulse) are determined by spherical charges, although most of ordnance devices are more nearly cylindrical than spherical in geometry. This may result in a great underestimation of blast loads in the near field and lead to an unsafe design. However, there is still a lack of systematic quantitative analysis of the blast loads generated from cylindrical charges. In this study, a numerical model is developed by using the hydrocode AUTODYN to investigate the influences of aspect ratio and orientation on the free air blast loads generated from center-initiated cylindrical charges. This is done by examining the pressure contours, the peak overpressures and impulses for various aspect ratios ranged from 1 to 8 and arbitrary orientation monitored along every azimuth angle with an interval of 5°. To characterize the distribution patterns of blast loads, three regions, i.e., the axial region, the vertex region and the radial region are identified, and the propagation of blast waves in each region is analyzed in detail. The complexity of blast loads of cylindrical charges is found to result from the bridge wave and its interaction with primary waves. Several empirical formulas are presented based on curve-fitting the numerical data, including the orientation where the maximum peak overpressure emerges, the critical scaled distance beyond which the charge shape effect could be neglected and blast loads with varied aspect ratio in arbitrary orientation, all of which are useful for blast-resistant design.     

空地导弹对飞机掩蔽库的毁伤效能评估

针对典型飞机掩蔽库目标,研究空地导弹对两种不同停放方式飞机的毁伤效能评估方法。首先定义了飞机的毁伤等级,其次构建了聚能侵彻战斗部对飞机掩蔽库的毁伤模型。最后通过蒙特卡罗仿真方法研究空地导弹对掩体内停放飞机的毁伤效果,并且计算了导弹的杀伤概率。仿真结果表明所建模型和采用的评估方法具有较强实用性和可操作性。     

金属射流欧姆加热效应的影响因素分析

为探究影响金属射流欧姆加热效应的因素,在被动电磁装甲系统等效电路模型的基础上,根据虚拟源点理论建立金属射流的作用时间模型,进一步明确金属射流在侵彻被动电磁装甲过程中每部分射流微元的作用时间;结合金属射流的比作用量模型,利用Matlab软件对金属射流的电流和比作用量波形随被动电磁装甲系统的电感、电容、电阻和充电电压的变化规律进行数值分析．仿真结果表明：随着系统电感的减小、电阻的减小、电容的增大和充电电压的增大,金属射流比作用量的峰值增大,有利于射流发生电爆炸．     

Formulations for dynamic lot sizing with service levels

In this article, we study deterministic dynamic lot‐sizing problems with a service‐level constraint on the total number of periods in which backlogs can occur over a finite planning horizon. We give a natural mixed integer programming formulation for the single item problem (LS‐SL‐I) and study the structure of its solution. We show that an optimal solution to this problem can be found in \begin{align*}\mathcal O(n^2\kappa)\end{align*} time, where n is the planning horizon and \begin{align*}\kappa=\mathcal O(n)\end{align*} is the maximum number of periods in which demand can be backlogged. Using the proposed shortest path algorithms, we develop alternative tight extended formulations for LS‐SL‐I and one of its relaxations, which we refer to as uncapacitated lot sizing with setups for stocks and backlogs. {We show that this relaxation also appears as a substructure in a lot‐sizing problem which limits the total amount of a period's demand met from a later period, across all periods.} We report computational results that compare the natural and extended formulations on multi‐item service‐level constrained instances. © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013